Embedded Files
1. GENERAL INFORMATION ABOUT THE PRODUCT
1.1 System
Description : Packaging :
Loading : Transportation :
Demountable, modular, flat-pack containers
As it is a demountable system, it is possible to make the packaging of each part separately.
Containers should be loaded and unloaded by using the eye-bolds at the top corners.
It is possible to load the containers, completely demounted or assembled according to project, container dimensions, and quantities.
2. MAIN FRAMEWORK DETAILS
1. 2.1 Bottom Chassis
Production : Painting :
2. 2.2 Top Chassis
Production : Painting :
3. 2.3 Columns
Production : Painting :
After welding of cold-formed steel profiles with different sizes and thickness, the bottom chassis are ready for painting procedure. The thickness of the supportive components and cross member profiles is 3mm.
Chemical treatment + RAL 7032 electrostatic powder dying
After welding of cold-formed steel profiles with different sizes and thickness, the top chassis are ready for painting procedure. The thickness of the supportive components is 3mm.
Chemical treatment + RAL 7032 electrostatic powder dying
3mm thickness cold-formed steel profiles
Chemical treatment + RAL 7032 electrostatic powder dying
3. FLOORS & CEILINGS AND WALLS
3.1 Floors
The assembly of the floors is made after production and painting procedures.
Protection : Insulation : Vapor Barrier : Floor :
3.2 Ceilings
0.4mm thickness of galvanized sheet metals
50mm glasswool (Fire Class: A (DIN 4102))
100 micron polyethylene
18mm cement board + 2mm PVC Vinyl Flooring (Brand: Gerfloor or LG)
The assembly of the ceilings is made after production and painting procedures.
Roof : Insulation : Vapor Barrier : Ceiling :
3.3 Walls
System :
Panel Height : Insulation : Surfaces :
3mm thickness of galvanized sheet metals 80mm glasswool (Fire Class: A (DIN 4102)) 100 micron polyethylene
8mm laminated MDF board
Automated light steel frame technology - 1mm thickness of galvanized section C profiles
Panel height: 2.50mt – Inner clear height: 2.47mt 80mm rockwool (Fire Class: A (DIN 4102))
Exterior Cladding: 3mm thickness of electrostatic powder dyed galvanized trapezoidal sheet metals + Layer 130 Geotextile Membrane
Interior Cladding: 8mm laminated MDF board (PVC wainscots will be used for cladding in wet areas)
4. DOORS & WINDOWS
4.1 Exterior Doors
Dimension : Frame : Door Wing :
Lock :
4.2 Interior Doors
Dimension : Frame : Door Wing :
Lock :
4.3 Normal Windows
Dimension : Frame : Glass : Type : Accessories :
4.4 Transom Windows
Dimension : Frame : Glass : Type : Accessories :
1050 x 2100 mm Aluminum
50mm polyurethane injected door wings
Exterior Surface: 0.8mm thickness of electrostatic powder dyed galvanized sheet metal
Interior Surface: 0.5mm thickness of electrostatic powder dyed galvanized sheet metal
Mortise lock with cylinder
850 x 2100 mm Aluminum
50mm polyurethane injected door wings
Exterior Surface: 0.5mm thickness of electrostatic powder dyed galvanized sheet metal
Interior Surface: 0.5mm thickness of electrostatic powder dyed galvanized sheet metal
Mortise lock with cylinder
1050 x 1200 mm
Aluminum
4+12+4 mm double glazed Casement – Side Hung Security Grill + Insect Screen
700x400mm
Aluminum
Frosted Glass
Casement – Bottom Hung Insect Screen
5. ELECTRICAL INTALLATION & MATERIALS
5.1 System
Description : Power :
5.2 Materials
Fixtures :
Receptacles : Switches : Cables :
All cabling will be made inside the top chassis and panels. It is possible to run the cables through cable trays if it is requested by the client. Residual current circuit breakers are included in all of our containers.
220V, 50Hz
Fluorescent lighting fixtures (PELSAN/JÜPİTER), energy saver spot lighting fixtures (GOLDX), outside door overhead lighting fixtures (GLOPSAN)
Grounded receptacles (TPLAST) Grounded switches (TPLAST)
- Fixtures :
- Receptacles :
- Switches :
- AC Units : 3 x 4.0mm2 heat resistant antigron cable
3 x 1.5mm2 heat resistant antigron cable 3 x 2.5mm2 heat resistant antigron cable 2 x 1.5mm2 heat resistant antigron cable
Cable Brands: PRYSMIAN/HES/NEXANS
6. SANITARY INSTALLATION & MATERIALS
6.1 System
Description :
6.2 Materials
Wash Basins : Water Closets : Shower Basins :
Pipes : Exhaust Fans :
Sanitary installation and equipment will be assembled if there is any in the project.
Note: Materials listed below covers all the sanitary equipment that Astem-con uses in its’ standard projects. Only the materials corresponds with the project drawn are included in our prices.
Ceramic sink with pedestals c/w mirrors and wall mounted soap dish Eastern or Westerns type water closets c/w flushers with toilet paper holder
80x80cm or 90x90cm acrylic shower basins with cabinet (c/w all necessary accessories)
- Clean Water Pipes : PPR pipes (FIRAT) - Waste Water Pipes : PVC pipes (FIRAT)
Electrically operated exhaust fans
Report abuse