1. GENERAL INFORMATION ABOUT THE PRODUCT

1.1 System

Description : Packaging :

Loading : Transportation :

Demountable, modular, flat-pack containers

Containers are packed with its panels, doors, windows, columns and all necessary equipment in one package. Package height is 0.65cm.

Containers should be loaded and unloaded by using the eye-bolds at the top corners.

It is possible to load the containers as flat-packed, completely demounted or assembled according to project, container dimensions, and quantities

2. MAIN FRAMEWORK DETAILS

§ 2.1 Bottom Chassis

Production :

Painting :

§ 2.2 Top Chassis

Production :

Painting :

§ 2.3 Columns

Production : Painting :

After welding of cold-formed steel profiles with different sizes and thickness, the bottom chassis are ready for painting procedure. The bottom chassis are designed to bear 250kg/m2 load according to static analysis.

Chemical treatment + RAL 7032 electrostatic powder dying

After welding of cold-formed steel profiles with different sizes and thickness, the top chassis are ready for painting procedure. The top chassis are designed to bear 100kg/m2 load according to static analysis.

Chemical treatment + RAL 7032 electrostatic powder dying

2.5mm thickness cold-formed steel profiles

Chemical treatment + RAL 7032 electrostatic powder dying

3. FLOORS & CEILINGS AND WALL

3.1 Floors

The assembly of the floors is made after production and painting procedures.

Protection : Insulation : Vapor Barrier : Floor :

3.2 Ceilings

0.4mm thickness of galvanized sheet metals

50mm glasswool (Fire Class: A (DIN 4102))

100 micron polyethylene

18mm OSB-3 + 2mm PVC vinyl flooring (18mm cement board will be used in wet areas instead of 18mm OSB-3.)

The assembly of the ceilings is made after production and painting procedures.

Roof : Covering

Insulation : Vapor Barrier : Ceiling :

3.3 Walls

System :

Panel Height : Insulation : Panel Surfaces:

Fire CLass :

Thermal : Conductivity

4. DOORS & WINDOWS

4.1 Outer Doors

Dimension : Frame : Door Wing : Lock :

0.8mm thickness of galvanized sheet metals

50mm glasswool (Fire Class: A (DIN 4102)) 100 micron polyethylene

8mm laminated chipboard

1.00mt width & 50mm thickness of 40kg/m3 polyurethane sandwich panels are used for both inner and outer walls.

Panel height: 2.30mt – Inner clear height: 2.27mt 50mm polyurethane

Both inner and outer surface of panels are covered with 0.4mm thickness of RAL 9002 polyester dyed galvanized sheet metals.

B2- B3 (DIN 4102) 0.020 – 0.022 W/mK

850 x 2100 mm

PVC

50mm thickness of 40kg/m3 polyurethane sandwich panels Mortise lock with cylinder

§ 4.2 Inner Doors

Dimension : Frame : Door Wing : Lock :

§ 4.3 Normal Windows

Dimension : Frame : Glass : Type : Accessories :

§ 4.4 Transom Windows

Dimension : Frame : Glass : Type : Accessories :

850x2000mm&750x2000mm(WCDoors)

PVC

50mm thickness of 40kg/m3 polyurethane sandwich panels Mortise lock with cylinder

800 x 1200 mm

PVC

4+12+4 mm double glazed Casement – Side Hung Insect Screen

600x400mm

PVC

Frosted Glass

Casement – Bottom Hung Insect Screen

5. ELECTRICAL INTALLATION & MATERIALS

§ 5.1 System

Description :

Power :

§ 5.2 Materials

Fixtures :

Receptacles : Switches : Cables :

All cabling will be made inside the top chassis and panels. It is possible to run the cables through cable trays if it is requested by the client. Residual current circuit breakers are included in all of our containers.

220V, 50Hz

Fluorescent lighting fixtures (PELSAN/JÜPİTER), energy saver spot lighting fixtures (GOLDX), outside door overhead lighting fixtures (GLOPSAN)

Grounded receptacles (TPLAST) Grounded switches (TPLAST)

- Fixtures :

- Receptacles :

- Switches :

- AC Units : 3 x 4.0mm2 heat resistant antigron cable

3 x 1.5mm2 heat resistant antigron cable 3 x 2.5mm2 heat resistant antigron cable 2 x 1.5mm2 heat resistant antigron cable

Cable Brands: PRYSMIAN/HES/NEXANS

6. SANITARY INSTALLATION & MATERIALS

§ 6.1 System

Description :

§ 6.2 Materials

Wash Basins : Water Closets : Shower Basins :

Kitchen : Pipes : Exhaust Fans :

Sanitary installation and equipment will be assembled if there is any in the project.

Note: Materials listed below covers all the sanitary equipment that Astem-con uses in its’ standard projects. Only the materials corresponds with the project drawn are included in our prices.

Ceramic sink with pedestals c/w mirrors and wall mounted soap dish Eastern or Westerns type water closets c/w flushers with toilet paper holder

80x80cm or 90x90cm acrylic shower basins with cabinet (c/w all necessary accessories)

60x120 cm or 60x180cm kitchen counters complete with its’ sink and bottom & top counters

- Clean Water Pipes : PPR pipes - Waste Water Pipes : PVC pipes

Electrically operated exhaust fans